For domestic supplies that include an individual recharge circuit from the centralization according to scheme 2 of the ITC-BT-52, with a single direct main meter (P ≤ 50 kW) common to both circuits.
- Modular columns mounted in double insulated boxes.
- Copper plates 20x4 mm (20x4 mm double in phases for columns of 400 A) in general busbar and protection.
- Transparent protective veil with possibility of sealing in the functional fuse unit.
- UTE safety fuse bases 22x58 type FS-100.
- Connected with cable H07Z1-R of 10 mm² for counters and 2.5mm² for red wire of the control circuit.
- Space to install a single-phase PLC filter, and / or equipment associated with load management, in each supply.
- Switch of Individual Maneuver and cut in load of 4x80 A in each common supply to both circuits.
- Contactor Normally Open 4x40 in origin of the individual recharging circuit for maneuvering from inside the house. Possible later replacement by "High Impedance Device and Automatic Reset" (DAIRA).
- Output terminals for cable connection up to 16 mm², in individual derivation and in individual recharging circuit.
- Terminals for connection of the "Control or Communication Wire" (Red) of 2.5 mm².
- Terminals for connection of the "Recharge Circuit Maneuver Thread" (White) of 4 mm² from inside the house.
- Possibility of coupling a General Maneuvering Column (IGM) of 160A, 250A and 400A load cut type IGM-PST (with overvoltage protector).